Design and Customization Options:
-
Segment Layout:
-
Backlighting:
-
Display Size and Resolution:
-
Temperature Range:
-
Interface Options:
Detailed Parameters:
| Module size | 35.9(W)* 24.4(H)* 2.5(T) mm | Display mode | VA, Negative |
| LCD viewing area | 31.5(W)* 16.0(H) mm | Driver IC | ST7033 |
| Operating temp. | -20~+70℃ | LED backlight | White, 2PCS |
| Drive method | 1/4 Duty, 1/2 Bias | Working voltage | 3.3V |
| Viewing angle | 6 O'clock | Connection Way | COG+FPC |
The COG FPC VA liquid crystal section display with a black-and-white SPI interface is a common liquid crystal display module, featuring high integration and low power consumption. Here is an introduction to it:
Product Introduction:
COG Technology: COG (Chip On Glass) means that the chip is directly bonded to the glass. This technology can make the volume of the liquid crystal display module smaller, increase the integration degree, improve stability, and also help to enhance the display quality.
FPC Connection: FPC (Flexible Printed Circuit) is a flexible printed circuit board. It has the characteristics of being bendable and thin, which is convenient for connection with other devices and can adapt to different installation environments and space requirements.
VA Liquid Crystal Display: VA (Vertical Alignment) is a vertical alignment liquid crystal display technology, which has the advantages of high contrast and wide viewing angle, and can provide clear and sharp black and white display effects. Even when viewed from different angles, the image remains clearly visible.
Black and White Display: The black and white display mode can meet the needs of some scenarios where the display color requirements are not high, but the display clarity and contrast requirements are high. At the same time, the power consumption of black and white display is relatively low.
SPI Interface: SPI (Serial Peripheral Interface) interface is a high-speed, full-duplex, synchronous serial communication interface. It has the advantages of high communication rate, stable data transmission, and simple hardware connection, making it convenient for connection and communication with various master control chips.
Product Applications:
Industrial Control: It can be used for display panels of industrial equipment, such as temperature controllers, pressure meters, etc., providing clear parameter display and operation interface for operators.
Medical Equipment: It is used in medical instruments, such as blood glucose meters, blood pressure monitors, etc., displaying patients' physiological data or the working status of the equipment.
Portable Instruments: Suitable for handheld devices or portable instruments, such as handheld terminals, data collectors, etc., providing clear display effects, and its low power consumption also meets the requirements of portable devices.
Consumer Electronics: It can be used in smart home devices, electronic toys, etc., providing a user-friendly interactive interface, such as status display of smart locks, information display of electronic toys, etc.
FAQ:
1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable one
if it is standard products. Or we can customize for you based on your own requirement.
2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.
Packaging & Shipping:
Packaging: Carton boxess, Cupboard , EPE, Blister Tray, About the package way, it is up to the size of products,
according to customer request and demand. Different countries have not same requirement..
Shipping: Express way as DHL,Fedex,EMS,UPS,air shipping,sea shipping,Any shipping method you prefer.
Payment Method:
Our Services:
1. Free repair within one year after the shipment of products from us.
2. Replacement within 30 days after the shipment of products from us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our export volume is large. The shipping companies
can offer us good discounts.
5. Professional technician supports. We have a good after-sales service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA before packing and shipment.
7.Customers satisfactory is most important to us.If you have any problem or questions regarding our transaction.Please contact us by Email or online. It will be responded within 24 hours.
8.Products pictures only for your reference. please kindly refer to the specification. we can provide the products basic on the specification. or you can offer your own specification or drawing , we can customize all kinds of LCD displays for you. thanks for your kind support always.
